March 19, 2010 – Much of the talk about the demise of Fibre Channel relates to its prospects as a disk drive interface, where it is rapidly losing ground against SAS and SATA drives. But Fibre Channel as a SAN interconnect is still going strong, despite rapid growth in the NAS and iSCSI markets.
In fact, the Fibre Channel SAN market racked up record sequential revenue growth in the fourth quarter of 2009 – more than 15% quarter-over-quarter, according to the Dell’Oro Group market research firm. And the leading players in the Fibre Channel switch and HBA markets – Brocade, Cisco, Emulex and QLogic – turned in strong sequential performance numbers. Q4 2009 results were strong enough to put Fibre Channel revenues close to par with the record results recorded in late 2008.
Dell’Oro vice president Seamus Crehan attributes the strong performance to “improving economic conditions, overzealous budget cuts during the first half of 2009, government stimulus, alleviated supply constraints . . . and the server upgrade cycle that started in the second quarter of 2009.”
However, the future success of Fibre Channel as a SAN interconnect rests largely on the success of the Fibre Channel over Ethernet (FCoE) protocol.
InfoStor readers are by now very familiar with the potential benefits of FCoE and converged (LAN + SAN) networks (see Related Articles links at the end of this post). But a recent report from Gartner suggests that the concept has been over-hyped and that, in fact, many of the key arguments in favor of converged networks are flawed.
Here’s the Gartner press release, which includes a link to the full report (10 pages, $195):
Gartner Says Don't Assume That a Single Converged Data Center Network Is More Efficient Than Two Well-Designed Separate Networks
Converge All Data Center Traffic to a Single Technology, Not a Single Network
STAMFORD, Conn., March 16, 2010 — The notion that a single converged data center network makes for fewer switches and ports, resulting in a simpler network consuming less power and cooling, is flawed, according to Gartner, Inc. Gartner research shows that a converged data center network requires more switches and ports, is more complex to manage and consumes more power and cooling than two well-designed separate networks.
"The industry is abuzz with the promise of a single converged network infrastructure, this time in the data center core," said Joe Skorupa, research vice president at Gartner. "Alternatively described as Fibre Channel over Ethernet (FCoE), Data Center Ethernet (DCE), or more precisely, Data Center Bridging (DCB), this latest set of developments hopes to succeed where InfiniBand failed in its bid to unify computing, networking and storage networks."
"The promise that a single converged data center network would require fewer switches and ports doesn't stand up to scrutiny," Mr. Skorupa said. "This is because as networks grow beyond the capacity of a single switch, ports must be dedicated to interconnecting switches. In large mesh networks, entire switches do nothing but connect switches to one another. As a result, a single converged network actually uses more ports than a separate local area network (LAN) and storage area network (SAN). Additionally, since more equipment is required, maintenance and support costs are unlikely to be reduced."
In addition to the financial barriers to the success of a single converged data center network, Gartner also believes that there are significant design and management issues to be addressed. When two networks are overlaid on a single infrastructure, complexity increases significantly. As traffic shares ports, line cards and inter-switch links, avoiding congestion (hot spots) becomes extremely difficult. Mr. Skorupa said that over time, emerging standards, such as Transparent Interconnection of Lots of Links (TRILL) may make it easier to avoid these hot spots, but mature, standards-compliant implementations are at least two to three years away.
Debugging problems in the converged network are also more difficult since interactions between the LAN and SAN traffic can make root cause analysis more difficult. Since many problems are transient in nature, events must be correlated across the two virtual networks, increasing complexity. Should an outage be required for solving a problem or simply for performing maintenance, a downtime window that is acceptable for both environments may be required. This increases complexity and may increase cost, as well.
"It's clear that the barriers to a single network range from a dearth of available products and the price premium charged for those products to the requirement to "forklift upgrade" your entire network to long-standing organizational conflicts," said Mr. Skorupa. "However, while the promise that a unified fabric will require fewer switches and ports, resulting in a simpler network that consumes less power and cooling, may go unfulfilled, that doesn't mean that enterprises should forgo the benefits of a unified network technology."
Mr. Skorupa said that there is clear benefit in standardizing on a single technology for all data center networking if that technology adequately supports the needs of applications. This will simplify acquisition, training and sparing. However, settling on a single technology does not require that the networks be combined. Design, operations and troubleshooting is much easier with two separate networks, and it may also cost less to build two separate networks.
Additional information is available in the report "Myth: A Single FCoE Data Center Network = Fewer Ports, Less Complexity and Lower Costs."
Related articles from InfoStor:Guidelines for FCoE deployment The shift to FCoE is underway Is FCoE the future of data center networks?
For a cogent rebuttal to Gartner's arguments, see "Gartner on FCoE: Whoa There, Sparky"